Water damage? We're here to help 24/7.
Professional water damage restoration, emergency water extraction, structural drying, fire damage restoration and reconstruction throughout Bellevue, Seattle and surrounding communities.
Talk to our team now: (425) 449-6720 · IICRC-certified crews on site in under 60 minutes
| Reading location | Moisture |
|---|---|
| Kitchen, base cabinet Particle board | 38% |
| Hallway wall, 12in Drywall | 22% |
| Living room Subfloor | 16% |
| Bath, toe kick Drywall | 9% |
- On site in under 60 min24/7, nights & holidays
- IICRC CertifiedTrained restoration techs
- Licensed, Bonded & InsuredWA Lic. 425FIFW761KU
- Based in BellevueServing King County
One team from extraction to rebuild
We handle the emergency, the drying and the repairs, so you aren't coordinating three different companies after a loss.
Water Damage Restoration
Full mitigation after leaks, overflows and failed appliances, from first call to dry, documented walls.
Learn more →
Emergency Water Extraction
Truck-mounted and portable extraction to pull standing water out of carpet, pad and subfloors fast.
Learn more →Fire & Smoke Damage Restoration
Board-up, soot removal, odor control and cleaning after kitchen fires, house fires and smoke events.
Learn more →Mold Remediation
Contained removal of mold-affected materials, HEPA cleaning and correction of the moisture source.
Learn more →
Sewage Backup Cleanup
Safe cleanup of Category 3 water from backed-up drains, toilets and side sewers.
Learn more →
Structural Drying
Air movers, dehumidifiers and daily moisture readings until framing and drywall reach dry standard.
Learn more →
Crawlspace Restoration
Water removal, wet insulation tear-out, drying and new vapor barrier under the house.
Learn more →Reconstruction & Repairs
Drywall, flooring, cabinets, paint and trim to put the home back together after mitigation.
Learn more →Local crews who document everything
A restoration job is judged by what you can't see: the moisture inside the wall and the paperwork behind the claim. We take both seriously.
- Under 60-minute emergency responseBased in Bellevue, with crews working across the Eastside, Seattle and South King County.
- IICRC-certified techniciansOur crews are trained to industry standards for water, fire and mold restoration.
- Restoration and reconstructionThe same company dries your home and rebuilds it, with one point of contact.
- Clear communicationYou'll know what we found, what we're removing and why, and when equipment comes out.
Moisture monitoring
Pin and pinless meters plus thermal imaging to find water hiding behind walls and under floors.
Proper drying equipment
Commercial dehumidifiers and air movers sized to the room and the class of water loss.
Detailed documentation
Photos of every affected area before, during and after work, organized by room.
Insurance claim help
Drying logs, scopes and estimates ready to send to your adjuster.
Real work by our crews
Every photo here was taken by our team on an actual job in the Puget Sound area.
What happens after you call
Contact our team
Call any hour. We ask a few questions, tell you how to stop further damage and schedule a crew.
Inspect & document
We find the source, map moisture through the structure and photograph every affected area.
Remove water & stabilize
Extraction, removal of materials that can't be saved and protection of contents.
Dry, clean & monitor
Drying equipment runs while we take daily readings until materials reach dry standard.
Reconstruct & repair
Drywall, flooring, cabinets and paint to return the space to its pre-loss condition.
Every job is different. The steps, timeline and materials removed depend on the source of the water, contamination level, building materials and the scope approved by you and your insurer.
Paperwork your adjuster can work with
Claims move faster when the documentation is complete. We prepare it as part of the job.
Before you call your insurer
Write down when you found the water and where it came from. Take a few photos on your phone if it's safe. Keep any failed part, like a cracked supply line or water heater fitting, since your adjuster may want to see it.
Then call us. We can start mitigation while your claim is opened.
We help document your loss, but coverage and payment decisions are made by your insurance company. We can't guarantee that a claim will be approved.
See what our customers say
Read reviews from homeowners and property managers we've worked with, or leave one after your project.
Serving the Eastside, Seattle & King County
Our shop is in Bellevue at 1555 127th Pl NE. If your city isn't listed, call us and we'll tell you if we can reach you.
Primary service area
- Bellevue
- Seattle
- Redmond
- Kirkland
- Renton
- Issaquah
Also serving
- Bothell
- Sammamish
- Kent
- Newcastle
- Mercer Island
- Woodinville
- Snoqualmie
- Maple Valley
Answers before you call
What should I do right now if I have water damage?
Shut off the water source if you can do it safely, and turn off power to any wet area. Move valuables and furniture off wet floors, and put foil or blocks under furniture legs that can't be moved. Don't use a household vacuum on standing water. Then call us at (425) 449-6720 so we can get extraction started.
How long does structural drying take?
Most clean-water losses in a typical home dry in about three to five days. Hardwood, plaster, concrete and crawlspaces can take longer. We take moisture readings every day and only pull equipment once materials reach their dry standard, so you'll see the numbers, not a guess.
Will my homeowner's insurance pay for this?
Many policies cover sudden and accidental water damage, like a burst pipe or a failed supply line. Gradual leaks, flooding from outside and some sewer backups are often excluded or need a separate endorsement. Coverage is decided by your insurer, not by us. What we do is give your adjuster clear photos, moisture logs and a detailed scope so the claim is easy to review.
Do I need to wait for the adjuster before you start?
Usually no. Most policies expect you to take reasonable steps to prevent further damage. We photograph and document everything before we remove anything, so the adjuster can see the original condition. If you're unsure, call your carrier and tell them a mitigation company is on site.
When does water damage turn into a mold problem?
Mold can begin to grow on wet drywall, wood and carpet pad within 24 to 48 hours. Fast extraction and drying is the best way to prevent it. If you already see growth or notice a musty smell, we contain the area before removing anything so spores don't spread to the rest of the house.
What is Category 1, 2 or 3 water?
The industry classifies water by contamination. Category 1 is clean water, such as a supply line. Category 2 carries some contamination, such as a dishwasher or washing machine discharge. Category 3 is grossly contaminated, such as sewage or outside floodwater, and porous materials it touches usually have to be removed. The category decides what can be dried in place and what must go.
Don't let water damage get worse.
Every hour water sits, it moves deeper into drywall, framing and subfloor. Call now and a technician will talk you through what to do while our crew is on the way.